3 Toolkit Reference

• 3.1 Introduction
  • 3.1.1 VMS, UNIX, & MS-DOS
  • 3.1.2 Macintosh
• 3.2 CDFdir
  • 3.2.1 Introduction
  • 3.2.2 Executing the CDFdir Program
    • Usage:
    • Parameter(s):
    • Example(s):
  • 3.2.3 Output from the CDFdir Program
• 3.3 CDFcompare
  • 3.3.1 Introduction
  • 3.3.2 Executing the CDFcompare Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.3.3 Output from the CDFcompare Program
• 3.4 CDFconvert
  • 3.4.1 Introduction
  • 3.4.2 Executing the CDFconvert Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.4.3 Output from the CDFconvert Program
• 3.5 CDFstats
  • 3.5.1 Introduction
  • 3.5.2 Executing the CDFstats Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.5.3 Output from the CDFstats Program
• 3.6 CDFinquire
  • 3.6.1 Introduction
  • 3.6.2 Executing the CDFinquire Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.6.3 Output from the CDFinquire Program
• 3.7 SkeletonTable
  • 3.7.1 Introduction
  • 3.7.2 Executing the SkeletonTable Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.7.3 Output from the SkeletonTable Program
• 3.8 SkeletonCDF
  • 3.8.1 Introduction
  • 3.8.2 Executing the SkeletonCDF Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.8.3 Creating the Skeleton Table
• 3.9 CDFbrowse
• 3.10 CDFlist
  • 3.10.1 Introduction
  • 3.10.2 Executing the CDFlist Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.10.3 Interaction with CDFlist
• 3.11 CDFwalk
  • 3.11.1 Introduction
  • 3.11.2 Executing the CDFwalk Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.11.3 Interaction with CDFwalk
• 3.12 CDFedit
  • 3.12.1 Introduction
  • 3.12.2 Executing the CDFedit Program
    • Usage:
    • Parameter(s):
    • Qualifier(s):
    • Example(s):
  • 3.12.3 Interaction with CDFedit